Parameter
Overall Dimensions
Download
Cooperation| GYP80-T Rev:20230525 | ||||||||||
| Parameters | One-stage | Two-Stage | ||||||||
| Efficiency at full load,about≈ | 92% | 85% | ||||||||
| Weight,about≈ | 2.1kg | 2.6kg | ||||||||
| Recommended input speed | 3000rpm | |||||||||
| Design life | 10000h | |||||||||
| Installation position | Any | |||||||||
| Protection class | IP54 | |||||||||
| Working temperature | -15 ~ 90℃ | |||||||||
| Noise(measuring distance=100cm with inputspeed=3000rpm) | ≤60dB | |||||||||
| Backlash（Rated output torque*2%） | ≤1° | |||||||||
| One-stage Nominal ratio(actual) | Nominal output torque (N.m) | Max.Output Torque (N.m) | Max.Input Speed (rpm) | Moment of inertia kg*mm2 |
| 3.33 | 40 | 80 | 3184 | 74.51 |
| 4.18 | 41 | 82 | 4342 | 64.96 |
| 4.89 | 42 | 84 | 5307 | 60.74 |
| 6.83 | 33 | 66 | 7000 | 28.17 |
| 8.00 | 32 | 64 | 7000 | 53.37 |
| 9.75 | 23 | 46 | 7000 | 51.86 |
| Two-Stage Nominal ratio(actual) | Nominal output torque (N.m) | Max.Output Torque (N.m) | Max.Input Speed | Moment of inertia kg*mm2 |
| 11.11 | 42 | 84 | 3184 | 93.33 |
| 16.29 | 56 | 112 | 3184 | 92.09 |
| 20.44 | 57 | 114 | 4342 | 83.39 |
| 26.28 | 58 | 116 | 5307 | 77.80 |
| 30.75 | 67 | 134 | 7000 | 74.37 |
| 66.63 | 42 | 84 | 7000 | 71.35 |
| The Bearing Capacity on outputshaft | Force | Output speed | Stress point | |||||||
| 100rpm | 300rpm | 1000rpm | ||||||||
| Radial Force with axial-Force=0N | 970N | 680N | 455N | Middle of the KEY | ||||||
| Axial Force with radial-Force=0N | 2950N | 1800N | 1055N | Based on center of output shaft | ||||||
| GYP80-T1- 80 one stage-S34O | 96.11 KB |
|
| GYP80-T1- 80 one stage-R90O | 97.11 KB |
|
| GYP80-T1- 80 one stage-SO | 96.83 KB |
|
| GYP80-T2- 80 two stages-S34O | 96.9 KB |
|
| GYP80-T2- 80 two stages-SO | 97.47 KB |
|
| GYP80-T2- 80 two stages-R90O | 97.7 KB |
|
Hotline
+86-519-85132957
Address
217 Huanghe West Road, Xinbei District, Changzhou City, Jiangsu ProvinceCopyright 2023 Copyright Jiangsu Fulling Motor Technology Co., Ltd.
